Filament 3D Printing
Rules
Always check this website for the latest information about our printers. Follow the rules below.
- Bring your own filament or resin. Consumables that are free to use will be marked accordingly.
- Stick Around (no pun intended) for the first few layers. First-layer adhesion is critical to printing success.
- Unload the machine when done and put the filament back in the bag. For overnight prints, please leave a note on Slack with instructions on what to do when it is done.
- CLEAN UP YOUR MESS.
Printers
Read the devices' configuration information on the equipment list.
Filaments with fillers such as glow in the dark, carbon fiber, glass fiber, marble, and wood are abrasive. Don't print them with brass nozzles.
Drying Filaments
A filament dehydrator is available for drying filament.
| Filament | Temperature | Time |
| PLA | 50°C (122°F) | 3 hours |
| ABS / PETG | 65°C (149°F) | 3 hours |
| Dessicant | 65°C (149°F) | 3 hours |
Slicers
Prusa Slicer
Our configuration bundle will add printers to your current setup or replace them if your printers have the same name as ours.
Cube Hemera Revo
300°C E3D Hemera Revo, 0.25, 0.40, 0.60, and 0.80mm RapidChange brass nozzles, OctoPrint.
