3D Printing
Rules
- Book on Fabman. Other members can stop your print if you are not scheduled to use it.
- Bring your own filament or resin. Consumables that are free to use will be marked accordingly.
- Stick Around (no pun intended) for the first few layers. First-layer adhesion is critical to printing success.
- Unload the machine when done and put the filament back in the bag. For overnight prints, please leave a note on Slack with instructions on what to do when it is done.
- CLEAN UP YOUR MESS.
Printers
Read the devices' configuration information on the equipment list.
| Printer | Description |
|---|---|
| Cube Pro | 2 printers with enclosed heated chambers and garolite beds. Various nozzle types. |
| Prusa i3 | 2 printers with 0.40 nozzles, smooth and textured PEI removable plates. |
| Robo 3D | 2 printers with 0.60mm nozzles. |
Drying Filaments
A filament dehydrator is available for drying filament.
| Filament | Temperature | Time |
| PLA | 50°C (122°F) | 3 hours |
| ABS / PETG | 65°C (149°F) | 3 hours |
| Dessicant | 65°C (149°F) | 3 hours |
Slicers
Prusa Slicer
Our configuration bundle will add printers to your current setup or replace them if your printers have the same name as ours.
Filament Printers
Equipment Status
Please book on Fabman before using. Report malfunctions. Equipment in RED is temporarily unavailable.
Cube Hemera Revo
300°C E3D Hemera Revo with 0.25, 0.4, 0.6, and 0.8 RapidChange brass nozzles.
Training Required
Cube Mosquito Magnum
450°C Bondtech BMG / Mosquito Magnum with vanadium nozzle.
Resource Unavailable
Prusa Mk2
300°C 0.40mm steel nozzle.
Training Required
Prusa Mk3s
300°C 0.40mm brass nozzle. Firestorm Robotics has priority.
Training Required
Robo Buildtak
300°C 0.60mm steel nozzle. Donated by Alexander Cua
Training Required
Robo Garolite
300°C 0.60mm steel nozzle. Donated by Alexander Cua.
Training Required
Resin Printers
Equipment Status
Please book on Fabman before using. Report malfunctions. Equipment in RED is temporarily unavailable.
Anycubic Mono X
192x120x245 4K LCD. Donated by Jason T. Dickerson Family Foundation.
Training Required
Anycubic Photon S
115x65x165 405nm LCD SLA. Donated by Rudy Weekley.
Training Required
Phrozen Shuffle XL
Training Required